- Middle site
- 91
- Ahead by
- 4
Worth the mostLink straight to the final address+1
criterionprecision.com
Top 25%of the 263,577 sites mttr has read, at #31,295
It scores 90. Gemini does not cite it yet when asked “Who supplies 316 stainless fittings to spec, in small runs, within two weeks?”; it cites 1 other site. See the answer
A score says pages are well formed. It does not say an assistant cites the site.
Name the publisher
90 now92 with itTop 10% from 90
#31,295to#15,12316,172 places up74 of its 100 pages fail it. 3 in 4 ranked sites pass it.
Share
LinkedInShare on LinkedIn
FacebookShare on Facebook
The link
Anonymous
The cardSave the card
EmailWrite the email
Where it ranks
Held at 90 for its last 2 reads.
Beside it on the board
- #31,293paylesscooling.com90
- #31,294electricianencinoca.com90
- #31,295criterionprecision.com90
- #31,296chappelleroofing.com90
- #31,297degreeheatingandcooling.com90
6,428 sites score 90. A tie goes to the site with faster, leaner pages that say more and keep improving.
Where it stands
Each stage against the middle site. It trails on Trust.
- Middle site
- 59
- Ahead by
- 23
Worth the mostAnswer the first question right under it+1
- Middle site
- 98
- Behind by
- 14
Worth the mostName the publisher+2
- Middle site
- 57
- Ahead by
- 42
Worth the mostEach fix here is worth under a point
Against a typical site
The readThis siteTypicalAgainst typical
Pages read1004456 more than typical
Links a page2541319.7× typical
Words a page2,1543945.5× typical
Rules failing somewhere16142 more than typical
Half its pages answer in340 ms210 ms62% slower than typical
This siteWorse than typicalTypical, the middle ranked site, worked out each hour
The work, worth the most first
16 fixes. The first 4 are worth the most; each group says the places it lifts the site, counted from where every ranked site scores now.
FixIts pages that fail it, fewer is betterSites passing
Worth 2 points16,172 places up
Name the publisherTrust74 of 1003 in 4
Worth 1 point each11,176 places up each
Answer the first question right under itUnderstand40 of 1001 in 121
Fix description lengthsUnderstand63 of 1001 in 11
Link straight to the final addressAccess99 of 1001 in 2
Show 12 more fixes
Worth under a point each
Make near-copy pages distinctTrustAbout the whole site4 in 5
Add breadcrumb dataUnderstand97 of 1001 in 2
Link to your profilesTrustAbout the whole site4 in 7
Set a share imageUnderstand99 of 1002 in 7
Show sources on guidesTrust14 of 1001 in 2
Fix title lengthsUnderstand28 of 1001 in 6
Put figures in tablesUnderstand18 of 1001 in 28
Add lists or tablesUnderstand23 of 1001 in 2
Phrase headings as questionsUnderstand8 of 1001 in 10
Add structured dataUnderstand2 of 1001 in 3
Describe imagesUnderstand2 of 1002 in 7
Add a way to get in touchAct1 of 1001 in 2
How AI reads this site
It reads mostly as manufacturers and suppliers. 2 changes would make it plainer.
It reads as
Manufacturers and suppliersIt says it is an organization.
- None
- Loosely
- Split
- Mostly
- Clearly
- Closest lines of workAgainst the closest
- Manufacturers and suppliers
- Software and SaaS
- Auto repair and dealers
What an assistant reads first
Home pageWhat it says
TitleHome - Criterion Precision Machining
DescriptionCriterion Precision Machining delivers high-quality CNC machining services with unmatched precision, reliability, and expertise. Serving diverse industries with custom-engineered solutions made in the USA.
First headingPrecision Machining for 'No Failure' Industries
OpeningSmall parts. Big Impact. Built with certified precision in Cleveland, Ohio.
2 changes so it reads plainly as what it is
- Say what you do, for whom and where
Its pages read only partly as Manufacturers and suppliers. An assistant matches a site to a question by what its pages plainly say.
Agent instructions
On criterionprecision.com, rewrite the home page title and its first sentence to say plainly what the business does, for whom and where, so the site reads as Manufacturers and suppliers. Keep the title under 60 characters and lead with the service, not the name.
- Rewrite the description
Its description is 205 characters and is cut off in results.
Agent instructions
On criterionprecision.com, write the home page a meta description of one or two sentences, 50 to 160 characters: what the business does, for whom, and where.
- Read it again
mttr reads the site again and says how it reads now.
An estimate made by mttr against 16 lines of work, from its home page before any script runs. It is not what any assistant says about the site. Rethink the direction with us.
Not cited in any of 3 answers
3 questions people ask about manufacturers and suppliers, asked as a person would. These questions name no place.
Who supplies 316 stainless fittings to spec, in small runs, within two weeks?
Gemini
Sourcing custom or to-spec 316/316L stainless steel fittings in small runs with a sub-two-week turnaround requires domestic specialty metal fabrication shops or master PVF (Pipe, Valves, and Fittings) distributors with dedicated custom shops.
- 1Central States Industrial (CSI)For Sanitary & Process Fittings
- What they do CSI specializes in sanitary stainless steel components for food, beverage, dairy, and…
- The "Fast Fittings" Service They feature an emergency/rush program specifically designed for custom or modified…
- Turnaround Typically days (1 to 3 days for many expedited stock-modifications, or fast-tracked…
SaysEmergency service - 2Appleton StainlessFor Industrial & Custom Fabricated Fittings
- What they do A custom manufacturer specializing in stainless steel fittings
- 1
Which companies do powder coating for industrial parts?
Gemini
When looking for companies that perform powder coating for industrial parts, it helps to distinguish between the powder manufacturers (who make the chemical formulas and resins used in coating) and the industrial coating service providers / job shops (who physically prep, spray, and thermal-cure…
Where can I get injection molded parts for a prototype?
Gemini
If you need injection-molded parts for a prototype, you will want to look for companies that specialize in rapid injection molding or low-volume manufacturing.
- 1Protolabsprotolabs.com84mttr
- Widely considered the pioneer of rapid injection molding.
- 2Quickparts
- Known for fast, full-service custom manufacturing, bridging the gap smoothly from rapid…
- 1
What the cited sites pass that it fails
Fix them from the action plan- Link to your profiles8 of 8 cited sites pass it; you fail it on 1 page.
- Add a way to get in touch7 of 8 cited sites pass it; you fail it on 1 page.
- Link straight to the final address5 of 8 cited sites pass it; you fail it on 99 pages.