Agent View

|  |  |  |
| --- | --- | --- |
|  |  |  |
|  | [Click here to view and/or print the original catalog page](https://www.empireblended.com/engineered/pdf/All%20Temp%20Non%20Chloride.pdf) (If you cannot view the document, [click here](https://www.adobe.com/products/acrobat/readstep2.html) to get Adobe Reader for free) **Additive \| Accelerator** **ALL TEMP NON-CHLORIDE** Multi-purpose Liquid Admixture/Accelerator For Cement Based Materials ***MANUFACTURER:*** Empire Blended Products, Inc. 250 Hickory Lane C Bayville, NJ 08721 (732) 269-4949 C Fax (732) 269-0497 www.empireblended.com ***PRODUCT DESCRIPTION:*** *ALL TEMP NON-CHLORIDE* is a multi-purpose admix for concrete and mortar that does not contain chlorides. It is designed to accelerate the set time, as well as to densify, harden, improve the workability, and increase the strength development of finished mixes, thereby improving their water resistance and dust proofing qualities. *ALL TEMP NON-CHLORIDE* can be safely used with gray or white Portland Cement or colored masonry products without causing discoloration. Unlike traditional chloride based admixtures, *ALL TEMP NON-CHLORIDE* is non-corrosive and will not promote additional efflorescence. ***USES:*** Antifreeze and water reducer for concrete and masonry All weather use to improve workability and performance Slurry coat to eliminate surface voids and improve bond ***ADVANTAGES:*** Protects concrete and masonry from freezing Reduces initial set Non-corrosive Hardens, densifies and improves water resistance Increases both early strength and ultimate strength Improves workability and slump characteristics of concrete and masonry products Reduces water requirements Does not contain any chlorides ***INSTALLATION:*** **Mixing:** *ALL TEMP NON CHLORIDE* can be added directly to the gauging water or added directly to the product. Dosage rate is determined by the lowest expected temperature for a period of 48 hours following placement. **Curing:** Follow the recommendations of the Portland Cement Association for cold weather protection and curing. **Packaging:** Gallons (6 per case), 5 Gallon Pails and 55 Gallon Drums **Color:** Light green color ***SUGGESTED PROPORTIONS:*** **Concrete:** Above 32EF.......... 1 gallon *ALL TEMP NC* per cubic yard of concrete Below 32EF.......... 1 gallons *ALL TEMP NC* per cubic yard of concrete Never use more than 2 gallons per cubic yard of concrete. When temperature is below or expected to fall below 25EF in the 24 hour period following placement of material, supplemental heating of gauging water is essential. At these lower temperatures, work should be additionally protected. **Premixed Gravel Mix (80 lb. bag):** Above 32EF - 1 pint *ALL TEMP NC* per bag Below 32EF - 1 pint *ALL TEMP NC* per bag **Masonry (Portland-Lime Mortars):** Above 50EF - 1 pint *ALL TEMP NC* per bag Above 32EF - 1 quart *ALL TEMP NC* per bag Below 32EF - 1 quarts *ALL TEMP NC* per bag **Masonry (Cement Mortars):** Above 50EF - pint *ALL TEMP NC* per bag Above 32EF - 1 pint *ALL TEMP NC* per bag Below 32EF - 1 quart *ALL TEMP NC* per bag When temperature is below or expected to fall below 25EF in the 24 hour period following installation of brick or cement mortar applications, supplemental heating of gauging water and dry ingredients must be used. Protect finished work from wind and rain for 24 hours after installation. **Stucco, Masonry Paints, Tile Grouts and Other Cement Based Material:** Below 32EF……….1 gallon *ALL TEMP NC* to 16 gallons water Below 25EF……….1 gallon *ALL TEMP NC* to 12 gallons water Below 15EF……….1 gallon *ALL TEMP NC* to 10 gallons water ***TECHNICAL DATA:*** Empire Blended *ALL TEMP NON CHLORIDE* meets ASTM specification C-494 for Type C Accelerating Admixtures. ***LIMITATIONS:*** Never combine *ALL TEMP NON CHLORIDE* with other admixtures. Never add *ALL TEMP NON CHLORIDE* directly to the mix. It must be mixed with water and then introduced to the mix or balling can occur. Sand and aggregate used must be free of ice. Protect from freezing. ***CAUTION:*** Contains Ethylene oxide-nonylphenol polymer CAS # 9016-45-9 and Sodium Thiocyanate CAS #540-72-7. May cause eye, skin and respiratory irritation. Avoid contact with eyes, skin and clothing. Do not take internally. If ingested, **do not** induce vomiting and get prompt medical attention. If any product gets into the eye, rinse immediately and repeatedly with water. If skin contact occurs, flush affected areas with plenty of water. Remove and wash contaminated clothing before reuse. **Keep out of reach of children**. ***WARRANTY:*** Due to the use of this product beyond our control, we assume no liability for damages of any kind, and the user accepts the product "as is" and without warranties, expressed or implied, from either Empire Blended Products or its agents. The suitability of the product for an intended use shall be solely up to the user. Our only obligation shall be to replace or pay for any material proved defective, with our liability limited to the purchase price of materials supplied by us. [Click here to view and/or print the original catalog page](https://www.empireblended.com/engineered/pdf/All%20Temp%20Non%20Chloride.pdf) (If you cannot view the document, [click here](https://www.adobe.com/products/acrobat/readstep2.html) to get Adobe Reader for free) |  |
|  | [HOME](https://www.empireblended.com/) \| [ABOUT](https://www.empireblended.com/aboutdove.htm) \| [PRODUCTS](https://www.empireblended.com/engineered/systems.htm) \| [CONTACT](mailto:[email protected])[ARTICLES](https://www.empireblended.com/industry.htm) \| [LOCATIONS](https://www.empireblended.com/locations.htm)  250 Hickory Lane, Bayville, NJ 08721 Phone: 732-269-4949 \| Fax: 732-269-0497 [[email protected]](mailto:[email protected]) Copyright © Empire Blended Products, 2003 Site design by [Xtreme Web Creations](https://www.xtremewebcreations.com/) |  |